Industrial Heating Plates
Integrated solution for precision heating of surfaces and structures.
Electric heating plates make it possible to heat tools, desks and a variety of other surfaces. The plates are also a viable solution for heating valves, flow controllers, fittings and piping systems in gas mixing equipment. Electron is happy to advise you.
Features
| Temperature: -60 tot +240°C |
| Operating voltage: 6 – 400V, AC/DC (single or three phase), up to 750V on request |
| Heating capacity: 0,05 – 3 W/cm² (from 0,45 W/cm² and up we recommend to use a temperature controller |
| Maximum length: 3000 mm |
| Maximum width: 1000 mm |
| Thickness: 1,5 – 6 mm |
| Electrical connection: single core, cable, plug contacts |
| Temperature controller: dependent on the design |
| High voltage resistance: approximately 24 KV/mm (using standard materials) |
| Moisture protection on request |
| Series test: according to DIN EN 60335-1 (VDE 0700-1) and DIN EN 50106 (VDE 0700 part 500) |
| Approvals: according to DIN EN 60335-1 (VDE 0700-1) 2007-02 UL file E24820 |
Produed according to customer specifications
The electric heating plates within our range are produced according to customer requirements. The elements can produced in a variety of shapes. The good heat transfer of metal, which is used as the basis for the heating element, ensures a mechanically robust design with a homogeneous heat distribution and a high specific heating capacity.
Electrically insulated heating cables are used as heating elements. These are laid in recesses covering the entire available surface. The integrated heating wires are electrically insulated with silicone, PTFE, textile glass or quartz glass, depending on the power requirement and the nominal temperature. When using mineral-insulated stainless steel conductors, the heating plate is suitable for use under vacuum.
The sheet material is selected on the basis of the planned application. The heating surfaces can be anodized, hard coated, coated with PTFE or surface finishes depending on your requirements. To achieve a homogeneous surface temperature, it is possible to integrate several individually controllable heating circuits.
Our method
At Electron, we are pleased to discuss and explain our many value adding technologies and to think along with our customers. We have extensive experience in designing and manufacturing custom electric heating elements and systems, furnace accessories and insulation materials. Our employees will be happy to advise you on the best solution for your application.
Additional information
In addition to heating plates, we offer a variety of other products. Would you like to know more about our heating elements or one of our other products or do you have another question? Please contact us